Basic Equipment
- Triple high-speed 32 bit with 1 MB Memory.
- Complete Machine Enclosure with sliding Doors.
- Tool Change for 10 Tools.
- Single Electronic Handwheel.
- 10" color LCD monitor.
- USB Port.
- Taper Blow Out.
- Set of Levelling pads and Levelling bolts.
Travels
X Axis
: 406 mm
Y Axis
: 305 mm
Z Axis
: 254 mm
Spindle Nose to Table (~ max)
: 356 mm
Spindle Nose to Table (~ min)
: 102 mm
Spindle
Max Rating
: 5.6 kW
Max Speed
: 6000 rpm
Max Torque
: 45.0 Nm @ 1200 rpm
Drive System
: Direct Speed, Belt Drive
Taper
: CT or BT 40
Bearing Lubrication
: Grease Packed
Cooling
: Air Cooled
Table
Length
: 914 mm
Length (Work Area)
: 730 mm
Width
: 305 mm
T-Slot Width
: 15.90 mm to 16.00 mm
T-Slot Center Distance
: 110 mm
Number of Std T-Slots
: 3
Max Weight on Table (evenly distributed)
: 227 kg
Feedrates
Max Cutting
: 12.7 m/min
Rapids on X
: 15.2 m/min
Rapids on Y
: 15.2 m/min
Rapids on Z
: 15.2 m/min
Axis Motors
Max Thrust X
: 8896 N
Max Thrust Y
: 8896 N
Max Thrust Z
: 8896 N
Tool Changer
Type
: Carousel
Capacity
: 10
Max Tool Diameter (full)
: 89 mm
Max Tool Weight
: 5.4 kg
Tool-to-Tool (avg)
: 4.2 s
Chip-to-Chip (avg)
: 5.0 s
General
Coolant Capacity
: 151 L
Air Requirements
Air Required
: 113 L/min @ 6.9 bar
Inline Air Hose
: 3/8 in
Coupler (Air)
: 3/8 in
Air Pressure Min
: 5.5 bar
Dimensions - Shipping
Domestic Pallet
: 229 cm x 163 cm x 254 cm
Export Pallet
: 229 cm x 163 cm x 254 cm
Weight
: 1815.0 kg
Electrical Specification
Spindle Speed
: 6000 rpm
Drive System
: Direct Speed, Belt Drive
Spindle Power
: 5.6 kW
Input AC Voltage (1 Phase)
: 220 VAC
Full Load Amps (1 Phase)
: 40 A
Input AC Voltage (3 Phase) - Low
: 220 VAC
Full Load Amps (3 Phase) - Low
: 25 A
Input AC Voltage (3 Phase) - High*
: 440 VAC
Full Load Amps (3 Phase) - High*
: 13 A
